RADIX is a range of specific Antiscalants for Reverse Osmosis Membrane effective in controlling deposition of inorganic scales.

RADIX antiscalants are available in 5 kg and 25 kg HDPE containers

RADIX is generally safe but avoid contact with eyes and skin. Do not take internally. Gloves and goggles should be used while handling the product.

ROKLEEN is a range of high purity synthetic cleaners, used to remove alkaline scales and metal oxide deposits from membranes and associated pipe work.

ROKLEEN is generally safe but avoid contact with eyes and skin. Do not take internally. Gloves and goggles should be used while handling the product.

RADIX antiscalants are available in 5 kg and 25 kg HDPE containers

Antiscalant balls are pretreatment products formulated to prevent, rather than remove, scaling and inorganic fouling. A preventative system maintenance program with the antiscalant balls reduces membrane cleaning requirements while enhancing your RO system performance.

What can AcuRO ANTISCALANT BALLS do for you?
Most natural waters cause damages in RO membranes, pipes, boilers and other installations. Some contain dissolved minerals, mainly calcium and magnesium salts. Such waters are referred to as hard water.

Hard Waters form scale in membranes, pipes and boilers. This leads to a decrease in water pressure and an increased energy demand. Clogged pipes may have to be replaced. Heating coils may overheat and fail.

Hard Waters are aggressive to metals and cause corrosion. Consequently the tap water turns brown. Leaks and burst pipes may be the results.

AcuRO ANTISCALANT BALLS

• Protect water systems in hotels, public buildings, private households and industry against scale formation and corrosion.
• prevent so-called ‘brown’ or ‘red’ water and clogged pipes
• Save expensive repairs or even replacement of water pipes, boilers, heaters, cooling systems etc.
• Help to save energy
• Extend the life of your water installation.

AcuRO ANTISCALANT BALLS prevent scale and stops corrosion. It utilizes the phenomenon that minute concentrations of polyphosphates are sufficient to inhibit the deposition of scale onto metallic surfaces. Because of their phosphate and silicate content, ACURO ANTISCALANT BALLS also inhibits corrosion by forming a thin protective layer on the metal surface. A concentration of 2-3 ppm is sufficient to achieve both of these effects.

AcuRO ANTISCALANT BALLS will also slowly remove existing scale in old pipes if it consists of brown scale, i.e. ironoxide. Hard scale, i.e. calcium carbonate cannot so easily be removed by ACURO ANTISCALANT BALLS. Here the advantage is again that ACURO ANTISCALANT BALLS will prevent further scaling up. Experience shows that scale and corrosion is not only found in galvanized but also in copper pipes. Even in plastic pipes one can find scale and deposits.

As a rule of thumb one can say that 1 mm scale on the heating coils of a boiler, increases the energy cost by 15%. ACURO ANTISCALANT BALLS consists of 100% active substance. The use in tap water and other types of fresh water at the prescribed dosage is inoffensive.

AcuRO ANTISCALANT BALLS dispensers can be installed in almost every water system. They require no electric installation and hardly any maintenance. They only have to be refilled with spheres every 3 - 6 months. Refilling is very easy.

AcuRO ANTISCALANT BALLS protect membrane of domestic RO systems and ensures long life of membranes.

ACUROTEX 600 is an organo phosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties ACUROTEX-600 has a wide range of applications. One of the most important applications is in textile as sequestering agent for various steps of textile processing .It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment , textile applications. They show efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. They show efficiency in protecting metal corrosion.

Typical properties:
Appearance: white pellets Phosphorus content: 9,5 % (calculated)Acid value: max. 0,05 mg KOH/gWater content: max. 0,1 %Hazen color value: max. 50Free phenol content: max. 0,005 %Melting point: 48 - 50°C Refractive index nD 50°C: 1,555Density at 50°C: 1,205 g/cm3Viscosity at 50°C: 11 mpas specified properties Product description:Disflamoll® TP is a low volatility flame retardant. Based on its high phosphor uscontent it imparts good flame retardance to a large number of polymers.Applications:Disflamoll® TP is used as a plasticizer in the production of cellulose acetate films. Other fields of application where Disflamoll® TP may be used as a fire retardant include films, sheetings, coatings based on nitrocellulose, phenolicresins, ABS/PC and PPE/HIPS compounds.Storage:If stored correctly, the product has a minimum shelf life of 24 months.The product is prone to caking from 40°C upwards.

ACUROSIL IB is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers, for use in industrial, institutional, agricultural, food, beverage and domestic applications. ACUROSIL IB is a 20% aqueous solution of poly (hexamethylene biguanide) hydrodhloride, also known as PHMB.

Applications

ACUROSIL IB is effective in a wide range of industrial disinfection applications, promarily as a solid surface disinfectant. Applications areas include: Hospitals,Institutions,Veterinary establishments,Dairies,Milking parlours,Poultry hatcheries,Food processing plant,Breweries,Pasteuriers in canned food & beverage bottling plants,Yoghurt fermentation,Air-conditioning units,Cheese moulds,Beer glass cleaners

Amount to Use

ACUROSIL IB can be used alone or in combination with other biocides to create products for a wide range of disinfection applications. Considerable data exists which provides a measure of the intrinsic anti-microbial activity of ACUROSIL IB, generated via European suspension test protocols relevant to application in Food, Industrial, Domestic and Institutional Hygiene.
Its activity had been further demonstrated under conditions representative of practical use, and a range of use concentrations is provided in Table 3. However, it is recommended that fiels tests under practical conditions be undertaken to determine the most cost-effective dose for your application.

Hydroxyethyl Cellulose is non-ionic water-soluble polymer; it is effective in thickening, bonding, emulsifying, dispersing, stabilizing and water preserving in such industries like architectural coating, petroleum and daily-use chemicals. Hydroxyethyl cellulose is very easily soluble not only in cold water, but also in hot water, and can provide solutions with wider range of viscosity.Hydroxyethyl Cellulose is made from natural polymer cellulose, it is white to yellowish, odorless and tasteless powdered solid.
HEC & MHEC- Bermocoll (Make AKZO NOBEL)

Details of grades and quantities available are as below:

Bermocoll 411 FQ
Bermocoll 431 FQ
Bermocoll 1000

Birm Media is an economical and efficient filtration media designed to reduce dissolved iron and manganese compounds from water supplies.

• This media may be used in either pressurized or gravity fed water treatment systems
• Birm® acts as an insoluble catalyst to boost the reaction between dissolved oxygen (D.O.) and iron compounds
• Media Regeneration is not required
• Iron removal efficiency is very high
• Only periodic backwashing is required
• Resilient material with a long life and wide temperature range.

Chlorine Dioxide (CD) is a greenish-yellow gas and is a single-electron-transfer oxidizing agent with a chlorine-like odor. CD has been recognized since the beginning of the century for its disinfecting properties; and has been approved by the US EPA for many applications including the widespread use of CD in the treatment of drinking water.Chlorine dioxide is widely used as an antimicrobial and as an oxidizing agent in drinking water; poultry process water, swimming pools, and mouthwash preparations. It is used to sanitize fruit and vegetables as well as equipment for food and beverage processing. It is used to decontaminate animal facilities. It is also employed in the health care industries to decontaminate rooms, pass-throughs, isolators and also as a sterilant for product and component sterilization. What''s more, as an oxidizing agent, it is extensively used to bleach, deodorize, and detoxify a wide variety of materials, including cellulose, paper-pulp, flour, leather, fats and oils, and textiles. Approximately 4 to 5 million pounds of chlorine dioxide are used daily.

ACURO''s Low pH Membrane Cleaner is a fast acting formulation for cleaning of RO/NF/UF membranes by dissolving and dispersing organic and mineral deposits which primarily comprise of carbonates and sulfates of calcium, barium, stronium and magnesium.

Key Features and Benefits :

• Low pH formulation with organic chemicals
• Removes calcium carbonate, metal hydroxides and sulfate scales of calcium,barium, stronium and magnesium along with silica scales
• Very effective even in low concentrations
• Excellent dispersing properties for quick and easy removal of soil
• Low foaming
• Cost effective
• Easy to use and handle for its liquid state

The Katalox Light®- Arsenic Removal Media can be used in a pH range of 5.8 - 10.5. Recommended flow rates are based on the concentration of the iron, manganese and other mentioned contaminant in the raw water, but a good rule-of-thumb would be the loading rate at 6 - 12 gpm/ft² (15 - 30 m/h). The media will require occasional backwash and the OXYDES treatment to clean it's solid metal oxide surface